The block range
Every unit VertiCore casts, with the dimensions and weights the yard works to. All of it is dry-stacked and mortarless on a 24-inch course, and all of it is made at the Idaho Falls yard.
Block
Standard Block
The workhorse of the Verti-Block system — 48 inches wide with a stacked-stone front face, dry-stacked with no mortar.
48×24×36 in · 1,755 lb
Specs →
Half Block
A 24-inch-wide unit on the same 24-inch course height, for closing out a course that does not land on a whole block.
24×24×36 in · 1,068 lb
Specs →
44" Short Block
A cut standard block at 43⅝ inches, poured in-house for runs that will not close on 48-inch units.
43.625×24×36 in · 1,595 lb
Specs →
Two- and Three-Sided Block
Finished on more than one face, so the wall looks finished from both sides without a retrofit.
48×24×24 in · 1,896 lb · 49×24×24 in · 2,009 lb
Specs →
Planter Block
A finished-face unit sized for raised beds and planters, in two- and three-sided finishes.
48×24×24 in · 1,608 lb · 49×24×24 in · 1,809 lb
Specs →
Corner
Cap & top
Top Block
The finished top course — a standard-width unit with a finished upper face instead of an open core.
48×24×36 in · 1,312 lb · 24×24×36 in · 746 lb
Specs →
Corner Top Block
A handed top unit finished on the top and on the return face, for the finished end of a capped wall.
48×24×24 in · 1,360 lb · 48×24×24 in · 1,360 lb
Specs →
6" Cap
A shallow 6-inch cap course, in two- and three-sided finishes.
48×6×26 in · 478 lb · 49×6×26 in · 488 lb
Specs →
Accessory
Mass Extender
A 60-inch-deep unit on the same face dimensions, for walls that need more mass at the base.
48×24×60 in · 3,509 lb · 24×24×60 in · 1,661 lb
Specs →
Gap Insert
A shallow filler that levels an exposed block top so the course above can sit on a stepped-back position.
22×10×6 in · 102 lb · 19×10×6 in · 62 lb
Specs →